Tumindak cepet pneumatik mati / motong katup stainless steel
Tumindak cepet pneumatik mati / motong katup stainless steel
Tumindak cepet pneumatik ing spesifikasi katup mati / potong
| Pneumatik ing tutup kontrol mati | langsung liwat casting jinis globe |
| Tipe Spool: | jinis non-imbang utawa jinis imbang |
| Ukuran nominal: | DN20~200,, NPS 3/4,~ 8〞 |
| Tekanan nominal: | PN16 ~ 100, KELAS 150LB ~ 600LB |
| Koneksi: flange: | FF, RF, MF, RTJ |
| Welding: | SW, BW |
| Ukuran Flange: | Miturut IEC 60534 |
| Pneumatik On Offkatup kontrolTipe Bonnet: | Ⅰ: jinis standar (-20 ℃ ~ 230 ℃) |
| Packing: | V tipe PFTE packing, fleksibel.packing grafit, lsp. |
| Gasket: | Kemasan logam grafit |
| Aktuator: | Pneumatik: aktuator diafragma multi-spring, aktuator tipe piston. |
Pneumatic tumindak cepet ing mati / Cut mati tutup Material
| Jeneng komponen | Bahan Katup Kontrol |
| Badan/Bonet | WCB/WCC/WC6/CF8/CF8M/CF3M |
| Katup spool / Kursi | 304/316/316L (overlaying stellite alloy) |
| Packing | Normal: -196 ~ 150 ℃ yaiku PTFE, RTFE,> 230 ℃ yaiku grafit fleksibel |
| Gasket | Normal: Baja tahan karat kanthi grafit fleksibel, Khusus: paking jenis gigi logam |
| Tutup Diafragma | Normal: Q235, Khusus: 304 |
| Diafragma | NBR kanthi kain poliester sing dikuatake |
| Spring | Normal: 60Si2Mn, Khusus: 50CrVa |
| Kontrol katup stem | 2Cr13/17-4PH/304/316/316L |
Tumindak cepet pneumatik mati / ngethok kinerja katup
| Katup kontrol kursi tunggal pneumatik | cepet mbukak | |
| Kisaran sing diidini | 50: 1 (CV<6.3 30: 1) | |
| Nilai Cv sing dirating | Persentase CV1.6~630 ，linear CV1.8~690 | |
| Katup kontrol pneumatik Diijini bocor | Segel logam: kelas IV (kapasitas dinilai 0,01%) | |
| Pneumatic On Off Control Valve Performance | ||
| % kesalahan intrinsik | ± 1.5 | |
| Beda bali,% | ≤1.5 | |
| Zona mati,% | ≤0.6 | |
| Bedane saka wiwitan nganti pungkasan,% | ± 2.5 | |
| Rated travel prabédan,% | ≤2.5 | |
